|
![](/imagelib/sitebuilder/layout/spacer.gif) |
Heres what our customers are saying....
Thanks Vance 2 kicks and it started. First time I heard it since I bought it!
S Scott
Hi Vance
Vance- The motoplat ignition you repaired for me is working fine. I tickle the carburetor and it fires right up. Thank
you! Bob T.
Just wanted to say thank you and how trilled I am with your service.
I finally had to time to mount the unit. Set the timing three times using a dial indicator and each time I got the same
location so gave it a try.
¼ kick in 28-degree weather and she fired right up! Thank you so much, I will spread the work at the races to use you.
Thanks again
Kehl
The motoplat works flawlessly started right up. I'll send pics later. I really appreciate the fact that guys like you
continue to do this. Thanks again for the help!
Anthony P.
I’ve been dealing with a hard kick starting 1974 Montesa 250VR for quite some time. Did everything you could do to make
a motorcycle kick start except have the Motoplat rewired. Well, guess who had their Motoplat rewired? Vance Smith rewired
the Stator and with a couple of brisk kicks, Inigo the Montesa roared to life. Thank you Vance!
Scott A. Tallahassee, FL
Thanks
so much for the great job you did with coil rewind last fall. Completely cured the "big bore" starting problem having tried
everything else first.
Alan D Carlsbad ,CA
Vance,
ground off all the powder coating in all contact areas (engine , head ,coil ,etc.
started first kick.......
thanks for the troubleshooting advice...
AL D.
Vance,
I finally got around to putting
the motoplat on that you rebuilt for me. I just wanted to let you know I have a big fat blue spark and with help from you,
my old girl lives again.
Thank You,
Eric G.
Hello Vance,
Last fall you repaired the motoplat for my 1975 Penton 125. Just wanted to let you know it is
a one kick starter and yesterday I took first place in the Sportsmen 500 novice class in the MOVMX series. I also kept some
intermediate riders behind me. The bike ran great! Thanks again Vance.
Craig W
Hello Vance,
I got the ignition and put it back on the bike
and everything works great as it should. Thanks for fitting me into your tight schedule and getting me back on the bike..
before your vacation. Much appreciated!
Hey Vance, Sorry
this took so long...having way too much fun on the Ossa. Starts first kick hot or cold. Many thanks for your excellent work. Best
Regards, Chuck A.
Many thanks again for the stator rebuild - you can
tell that it's getting a hot spark when it kickstarts
easily...
Dave B.
|
Hi Vance......
Just wanted to thank you again for the repair. It was right on the money and works like a charm. Bike
hasn't run this well since before I purchased it a ton of years ago. Now the old man can show the wise youngster how to really
ride !!
Great Job !
Fred
Vance,
Finally got around to installing the Motoplat. Now I've got a running CR400 !! Thanks for the excellent work and quick
turn around. I'm singing your praises to my motoplat owning buddies.
Mel
Vance
Just got around to putting the bike back together today and it started 2nd kick right off, runs great. I killed it and
started it again 1/2 dozen times, started first kick every time.
Glenn
Vance
I would like to thank you for the great job you did on fixing my Motoplat. I can not beleive how good the bike runs now.
Your Website, Before you start Instructions, How to ship, turnaround, Craftsmanship and the little note you included on what
type of spark plug to use, is Fantastic.
G. Covington
Hi Vance,
All I can say is NICE WORK!!! Recieved the unit yesterday, installed it today and it as you said, great spark! I
also believe that's about the fastest turnaround I've ever had for something that wasn't in my back yard. Kudos, thanks again
and I'm working on gettin' your cards to the right folks.
Mike H.
|
Vance,
Thanks for the great work and service. The old Gas-Gas runs like new now!
Gary W. CA
|
Vance, you're the man! That solved the problem. Now it revs like a
champ. Even rode it around the yard. I have another that I will send
you
when I get some time.
Thanks again!
Enjoy The Sport,
Patrick
|
Vance Im using one of the Motoplat's you rebuilt and
it starts first kick warm or cold !!!
Thanks, Gregg
|
After receiving my Motoplat today my cousin and I installed it on my 360WR. It started first kick!
Type at you later,
Dan McEntee
|
Hello Vance,
I just wanted to let you know that I had received the repaired ignition system and that I have reinstalled it and
it works great. I have a very strong spark. Thanks for your excellent service. Everyone that owns one of these old machines
needs to know about you and the services that you provide. Best Regards, John
|
Vance,
Many thanks for getting my OSSA running at Mid Ohio Vintage Days. It was the oldest one running.
Thanks Again,
|
I received my ignition, installed it on Saturday, went racing on Sunday, & everything worked out great! Thank you for
all your help. I really appreciate all your help and will share my great experience with your service with everyone I talk
to here in northern California.
Thanks again, C. F.
|
Hi Vance, you were right, I now have a one kick machine! I finally got to putting in the rebuilt Motoplat and it runs great.
JAS
|
Vance,
I never told you how pleased I was with Can Am stator that you did for me.
Now I think I need some more work from you.
Michael H.
|
![](/imagelib/sitebuilder/layout/spacer.gif) |
|
![](/imagelib/sitebuilder/layout/spacer.gif) |
Do you have any comments? Please send us an e-mail at:
vtssmith@yahoo.com
|
![](/imagelib/sitebuilder/layout/spacer.gif) |
|
![](/imagelib/sitebuilder/layout/spacer.gif) |
|
|
|
Vance Smith
2264 N.W. 47th Circle
Ocala, FL 34482-8787
|
|
|
![](/imagelib/sitebuilder/layout/spacer.gif) |